Polyurethane Recoil Hose
Code Number – PURC1
- Tough from the inside out
- Exceptional wear and kink resistant
- Recoil that lasts and lasts
- Leak free swivel fittings
- Resistant to vibration loosening
- Contact Form
The polyurethane recoil hose is the ideal choice for tough and challenging air tool hose requirements.
With exceptional wear and kink resistance, this heavy duty hose has a recoil that lasts and lasts. While it is tough, it is also light and flexible, making it easier to use.
Fittings replacement is made easy with brass fittings that let you make changes on the spot. All swivel fittings come with factory applied thread sealant, resulting in a dependable, leak tight seal which is resistant to vibration loosening.
|Code||Description||W.P 23°c||b.p 23°c|
|PURC1/4X5M||1/4″ ID Recoil Hose 5m||145 PSI||450 PSI|
|PURC1/4X7.5M||1/4″ ID Recoil Hose 7.5m||145 PSI||450 PSI|
|PURC1/4X10M||1/4″ ID Recoil Hose 10m||145 PSI||450 PSI|
|Tough from the inside out|
|Polyurethane is an extremely tough plastic, used everywhere from skate board wheels to auto bumpers. Our polyurethane retractable hoses are the ideal choice for tough and challenging air tool hose requirements.|
|Exceptional wear and kink resistant|
|While you can cut a coil hose with a sharp knife, it is at least 10 times more tear resistant than other hoses. Most oils and fuels will not affect the coil, and it is almost impossible to permanently kink. The recoil hose resists everyday abuse without leaving a dent, and spring guards are not required.|
|Recoil that lasts and lasts|
|Put our coil to the test – stretch it out to full length, give it a further strong pull, and then release. Watch the hose recoil right back, regaining its memory immediately. The coil has a memory that can be depended on.|